Contact Us
Overseas Market Sales Dept.
Add: No 188, Anshan West Road,
Nankai District, Tianjin, China
General Line: +86-22-23796980
Sales Line 01:+86-13672013688
Sales Line 02:+86-15620075781
FAX: +86-22-23796811
Email: sales@ettespower.com
ettespower@gmail.com
New Web Site:
www.ettesgenerator.com
Old Web Site:
www.ettespower.com
Skype No 1: ettespower
Skype No 2: ettes-power
Products Center
Sewage Gas Generator
► Sewage Gas Biogas and Sewage Sludge
The purification of wastewater produces leftovers: sewage sludge and sewage gas, valuable residues of wastewater treatment and also raw materials that can be used in energy generation/power generator.
Using sewage gas to reduce our own energy costs. Large quantities of energy-rich sewage gas are produced in the digester tanks of sewage treatment plants during the final step of wastewater treatment. This gas can be used as fuel for engine cogeneration units, which produce both electricity and heat simultaneously.
Sewage gas as an innovative raw material. After processing to produce gas of natural gas quality or hydrogen, sewage gas can be used for many purposes, such as fuelling vehicles, heating buildings and supplying them with power.
Sewage sludge as an energy source and raw material. Besides sewage gas, sewage sludge is also an important raw material. It can either be incinerated to generate electricity or be used in agriculture and landscaping. Because it contains valuable trace elements, such as phosphorus, sludge is suitable for use as a fertilizer. Some sewage sludge is used on agricultural land, subject to strict legal conditions, and small quantities are used in landscaping.
► Flow Chart of Sewage Gas Power Generation/CHP Plant
► Flow Chart of Sewage Gas Power Generation/CHP Plant
► Ettes Power Sewage Biogas Engine Generators
► Ettes Power Biogas Quality Requirements
• The content of CH4 ≥40%
• changing rate ≤2%/min
• Gas Temperature ≤40℃
• Pressure of biogas: 7-20kpa, rate of pressure change ≤1kpa/min
• H2S≤200mg/Nm3
• NH3≤20mg/Nm3
• Moisture Content≤40g/Nm3
• Impurity particular≤5um, Impurity content ≤30mg/Nm3
CNPC Sewage Biogas Engines & Generator Set (from 250kW upto 1000kW)
Remarks:
• 50Hz & 60Hz are available, Various low Voltage and High Voltage of 3.3kV~13.8kV are available for options.
• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel Control panels and CHP are available for options.
• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.
Deutz Sewage Biogas Engines & Generator (from 50KW upto 250KW).
MAN Sewage Biogas Engines & Genset & CHP (from 66KW upto 560KW).
★Remarks:
Ettes Power is one of biggest manufactures and suppliers for gas engine generation/Power plant in China. Our generators enjoy hot markets more than 70 countries all over the world. Ettes Power Biogas engine Generation can be driven by world famous gas engines of Perkins, MWM-Deutz, SDEC 135, CNPC 190 and Low Speed 300 series, coupled with Stamford, Leroy Somer, Siemens or Marathon alternators, power ranging from 20kva upto 4000kva.
CNPC 190 Sewage Digester Gas Generation from 200kw upto 1200kw MAN Sewage Biogas Generation from 66kw upto 560kw
LOVOL Waste Water Gas Generator from 300kw upto 1000kw DEUTZ Sewage Gas Genset from 50kw upto 1200kw
LOVOL Waste Water Gas Generator from 300kw upto 1000kw DEUTZ Sewage Gas Genset from 50kw upto 1200kw
Ettes Power gas power generators enjoy hot ready markets in domestic markets and overseas markets including South Africa, South America, Europe, Middle East and Southeast Asia countries etc. By adopting gas generators concerning technologies of Mixer, Ignitions System, Governor System from WOODWARD, HEINZMANN, ALTRONIC, IMPCO and equivalents, our gas generator set can run at highly steady & credible performance, easy for maintenance, much longer life-span and very economic in price based on wonderful quality.
| Main Machine Configuraiton and Key Parts of Ettes Power Sewage Biogas Engine Genset | |
| Gas Engine | CNPC 190, Cummins, Perkins, MAN, MWM-DEUTZ, Low Speed 300 Series |
| Alternator | Siemens, Leroy Somer, Stamford, Marathon |
| Governor/Actuator | USA Woodward, Germany Motortech, Germany Heinzmann |
| Ignition Controller | Altronic, Motortech, AFS |
| Spark Plugs | Bosh, NGK, Motortech, STITT |
| Mixer | USA Impco, Woodward or Heinzmann |
| Turbocharger | ABB or Equal |
| Intercooler | Germany GEC |
| Control Module: | Deepea DSE7320/8610/8620, ComAp AMF25/IG-NT or Smartgen 6120/9510 |
| Optional Device: |
CHP/Cogeneration/CCHPTrigeneration Steel Soundproof Container (sound attenuated canopy) ATS and Synchronization Parallelling Panel Remote Control Power Station Central Management System PMG Alternator Cooling Tower, Remote Table Radiator Oil and Water Heater Muffler and Pipes High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet, CT Cabinet, High Voltage outgoing cabinet, DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc) |
► Ettes Power Biogas Quality Requirements
• The content of CH4 ≥40%
• changing rate ≤2%/min
• Gas Temperature ≤40℃
• Pressure of biogas: 7-20kpa, rate of pressure change ≤1kpa/min
• H2S≤200mg/Nm3
• NH3≤20mg/Nm3
• Moisture Content≤40g/Nm3
• Impurity particular≤5um, Impurity content ≤30mg/Nm3
CNPC Sewage Biogas Engines & Generator Set (from 250kW upto 1000kW)
CNPC Series Sewage Biogas Engine Generator (50/60Hz) |
|||||||||||
|
Model
|
Rated
Power |
Engine
Model |
Rotation
Speed |
No.of
Cylinders & Type |
Displace
ment (L) |
Alternator
|
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
kW
|
kVa
|
190 & 300
Series |
RPM
(50HZ/60HZ) |
Siemens
Marathon or Equal |
|||||||
|
EJ-250NB
|
250
|
313
|
6190ZLT
|
1000/1200
|
6.L
|
35.7 |
1FC6 Series
|
4950*1760*2200
|
8750
|
 |
|
|
EJ-320NB
|
320
|
400
|
G8V190ZLD
|
1000/1200
|
8.Vee
|
47.6
|
1FC6 Series
|
4566*2040*2200
|
10700
|
|
|
| •EJ-400NB | 400 | 500 | 12V190DT |
1000/1200
|
12.Vee
|
71.5 |
1FC6 Series
|
4566*2040*2200
|
11500 | |
|
| EJ-450NB | 450 | 563 | 12V190ZDT | 1000/1200 |
12.Vee
|
71.5 |
1FC6 Series
|
4790*2040*2212
|
11800 | |
|
| EJ-500B | 500 | 625 | G12V190ZLDT |
1000/1200
|
12.Vee
|
71.5 |
1FC6 Series
|
5260*2040*2500
|
12800
|
|
|
| •EZ-500NB | 500 | 625 | 6300D/T | 600/600 | 6.L | 161 |
1FC6 Series
|
6400*1600*2900 | 22000 | |
|
|
EJ-600NB
|
600
|
750
|
G12V190ZLDT
|
1000/1200
|
12.Vee
|
71.5 |
1FC6 Series
|
5260*2040*2500
|
12600
|
|
|
| •EZ-600NB | 600 | 750 | 8300D/T-1 | 500/500 | 8.L | 215 |
1FC6 Series
|
6400*1600*2900 | 22000 | |
|
| •EZ-700NB | 700 | 875 | 8300D/T-2 | 600/600 | 8.L | 215 |
1FC6 Series
|
6400*1600*2900 | 22000 | |
|
|
EJ-800NB
|
800
|
1000
|
H16V190ZLT
|
1000/1200
|
16.Vee
|
97.53
|
1FC6 Series
|
6070*2380*2776
|
22000
|
|
|
|
EJ-1000NB
|
1000
|
1250
|
H16V190ZLT
|
1000/1200
|
16.Vee
|
97.53
|
1FC6 Series
|
6070*2380*2776
|
22000
|
|
|
| EZ-1000NB | 1000 | 1250 | 8300ZLD/T-1 | 600/600 | 8.L | 215 |
1FC6 Series
|
6400*1600*3100 | 25000 | |
|
Remarks:
• Model with "B" means for biogas; Model with "NB" means for both natural gas and biogas;
• Model with "•" means engine air intake is naturally aspirated (without turbocharger and intercooler), which is suitable for low quality methane gas. • 50Hz & 60Hz are available, Various low Voltage and High Voltage of 3.3kV~13.8kV are available for options.
• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel Control panels and CHP are available for options.
• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.
Deutz Sewage Biogas Engines & Generator (from 50KW upto 250KW).
Deutz Sewage Biogas Engines made in China (50/60Hz) |
|||||||||||
|
Model
|
Rated
Power |
Engine
Model |
Bore*Stroke
(mm) |
Displace
ment (L) |
No.of
Cylinders & Type |
Air Intake
Method |
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
KW
|
KVA
|
||||||||||
| ED-50NB | 50 | 63 | TBD226B | 105*130 | 6.8 |
6.L
|
Natural | 2320*980*1450 | 1050 | |
|
| ED-60NB | 60 | 75 | TBD226B | 105*130 | 6.8 |
6.L
|
Natural | 2320*980*1450 | 1100 | |
|
| EST-80NB | 80 | 100 | WD615 | 126*130 | 9.8 |
6.L
|
Natural | 2700*980*1680 | 1900 | |
|
|
ED-80NB
|
80
|
100
|
TBD226B
|
105*130
|
6.8
|
6.L
|
Turbo
|
2550*1100*1450
|
1250
|
|
|
|
EST-100NB
|
100
|
125
|
WD615
|
126*130
|
11.6
|
6.L
|
Natural
|
2750*1080*1680
|
2100
|
|
|
|
ED-100NB
|
100
|
125 | BF6M1015 | 132*145 | 11.9 |
6.Vee
|
Natural
|
2350*1200*1750
|
1650
|
|
|
| EST-120NB | 120 | 150 | WD615 |
126*130
|
9.8 | 6.L | Turbo | 2850*1100*1680 | 2250 | |
|
|
ED-120NB
|
120
|
150 |
BF6M1015
|
132*145
|
11.9
|
6.Vee
|
Natural
|
2450*1200*1750
|
1780
|
|
|
|
EST-150NB
|
150 |
188
|
WD618
|
126*155
|
11.6
|
6.L
|
Turbo
|
3050*1100*1800
|
2210
|
|
|
|
ED-150NB
|
150 | 188 |
BF6M1015
|
132*145
|
11.9
|
6.Vee
|
Turbo
|
2600*1250*1750 | 2150 | |
|
| EST-200NB | 200 | 250 | WD618 | 126*155 | 11.6 | 6.L | Turbo | 3050*1100*1800 | 2320 | |
|
| ED-200NB | 200 | 250 | BF6M1015 | 132*145 | 11.9 | 6.Vee | Turbo | 2650*1460*1880 | 2250 | |
|
| ED-250NB | 250 | 313 | BF8M1015 | 132*145 | 15.9 | 8.Vee | Turbo | 3000*1550*1950 | 2650 | |
|
★Remarks:
• Low voltage of 380V/400V/415V/440V/480V/690V, High Voltage of 6.3KV/10.5KV and other special voltages are available.
• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel panels and CHP are available for your options.
• Above power ratings are based on natural gas (PNG, LNG, CNG). For other gas types such as biogas, oilfield associated Gas and Coalmine Gas etc., the engine power rating will be adjusted according to the exact gas quality.
• The data herein can vary depending on individual production requirements or due to improved technology.
• Low voltage of 380V/400V/415V/440V/480V/690V, High Voltage of 6.3KV/10.5KV and other special voltages are available.
• Special requirements for Soundproof Canopy/Container, ATS, Synchronizing Parallel panels and CHP are available for your options.
• Above power ratings are based on natural gas (PNG, LNG, CNG). For other gas types such as biogas, oilfield associated Gas and Coalmine Gas etc., the engine power rating will be adjusted according to the exact gas quality.
• The data herein can vary depending on individual production requirements or due to improved technology.
MAN Sewage Biogas Engines & Genset & CHP (from 66KW upto 560KW).
MAN Biogas/Landfill Gas/Sewage Gas Generators (50Hz, 1500rpm) |
|||||||||||||
|
Model
|
COP
|
Engine
Model |
Engine
Power |
Alternator
|
Configura
tion |
Elec. Eff.
|
Heat Eff.
|
Tot. Eff.
|
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
KW
|
MAN
|
KW
|
Leroy Somer
or Equal |
||||||||||
|
EM-66B5
|
66 | E0834LE302 |
68
|
LSA Series
|
L4 | 38.3% | 52.0% | 90.2% |
2800*1050*1550
|
1800
|
|
||
| EM-100B5 | 100 | E0836LE202 | 110 |
LSA Series
|
L6 | 36.5% | 49.3% | 85.8% | 3700*1150*1750 | 2200 | |
||
| EM-200B5 | 200 | E2876LE202 | 220 | LSA Series | L6 | 36.7% | 46.8% | 83.5% | 4300*1300*2000 | 4400 | |
||
| EM-220B5 | 220 | E2676LE212 | 252 | LSA Series | L6 | 40.2% | 49.1% | 89.3% | 4300*1300*2000 | 4600 | |
||
| EM-250B5 | 250 | E2848LE322 | 265 | LSA Series | V8 | 38.1% | 49.6% | 87.7% | 4300*1300*2000 | 4600 | |
||
| EM-350B5 | 350 | E3268LE222 | 370 | LSA Series | V8 | 39.3% | 50.5% | 89.8% | 5200*2000*2100 | 6600 | |
||
| EM-400B5 | 400 | E2842LE202 | 420 | LSA Series | V12 | 38.1% | 50.3% | 88.4% | 5200*2000*2100 | 6400 | |
||
| EM-450B5 | 450 | E3262LE232 | 500 | LSA Series | V12 | 40.1% | 48.9% | 89.0% | 5500*2000*2100 | 7500 | |
||
| EM-520B5 | 520 | E3262LE202 | 550 | LSA Series | V12 | 38.3% | 48.2% | 86.5% | 5200*2000*2100 | 7500 | |
||
MAN Biogas/Landfill Gas/Sewage Gas Generators (60Hz, 1800rpm) |
|||||||||||||
|
Model
|
COP
|
Engine
Model |
Engine
Power |
Alternator
|
Configura
tion |
Elec. Eff.
|
Heat Eff.
|
Tot. Eff.
|
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
KW
|
MAN
|
KW
|
Leroy Somer
or Equal |
||||||||||
|
EM-66B6
|
66 | E0834LE302 |
68
|
LSA Series
|
L4 | 37.2% | 52.5% | 89.6% |
2800*1050*1550
|
1800
|
|
||
| EM-100B6 | 100 | E0836LE202 | 110 |
LSA Series
|
L6 | 35.1% | 53.7% | 88.8% | 3700*1150*1750 | 2200 | |
||
| EM-180B6 | 180 | E2876LE302 | 200 | LSA Series | L6 | 34.6% | 50.8% | 85.4% | 4300*1300*2000 | 4400 | |
||
| EM-220B6 | 220 | E2676LE212 | 250 | LSA Series | L6 | 40.3% | 46.4% | 86.7% | 4300*1300*2000 | 4600 | |
||
| EM-250B6 | 250 | E2848LE322 | 295 | LSA Series | V8 | 35.7% | 51.3% | 87.0% | 4300*1300*2000 | 4600 | |
||
| EM-390B6 | 390 | E3268LE222 | 420 | LSA Series | V8 | 37.5% | 50.5% | 88.0% | 5200*2000*2100 | 6600 | |
||
| EM-420B6 | 420 | E2842LE322 | 462 | LSA Series | V12 | 38.4% | 52.3% | 90.7% | 5500*2000*2100 | 7500 | |
||
| EM-560B6 | 560 | E3262LE202 | 580 | LSA Series | V12 | 37.4% | 51.5% | 88.9% | 3300*1700*1600 | 3300 | |
||
★Remarks:
• Above Gensets Models are based on AC Voltage of 400/230V and 480V/270V, Other special low Voltages.
• Above data is based on gas HV 20.4MJ/ Nm³; Power Factor Cosφ=1; Exhaust Temperature decreased to 120℃; Heat Value Tolerance 8%, Output Power Tolerance 5%.
• NOx Emissions Level <500mg/m3 . Special requirements for emissions data such as EPA Standard can be realized by adding SCR and CO Catalyst.
• Engine Overhaul Time is around 50000~60000 hours.
• Wrranty terms: 15 Months after delivery , 12 Months after Installment or 8000 hours accumulated running time, which is subject to the earlier one.
• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.
MWW Sewage Biogas Engines & Generators & CCHP ( from 400kw upto 3770KW).
• Above Gensets Models are based on AC Voltage of 400/230V and 480V/270V, Other special low Voltages.
• Above data is based on gas HV 20.4MJ/ Nm³; Power Factor Cosφ=1; Exhaust Temperature decreased to 120℃; Heat Value Tolerance 8%, Output Power Tolerance 5%.
• NOx Emissions Level <500mg/m3 . Special requirements for emissions data such as EPA Standard can be realized by adding SCR and CO Catalyst.
• Engine Overhaul Time is around 50000~60000 hours.
• Wrranty terms: 15 Months after delivery , 12 Months after Installment or 8000 hours accumulated running time, which is subject to the earlier one.
• The data herein is just for purpose of reference only and not binding. The data given in the official offer is decisive.
MWW Sewage Biogas Engines & Generators & CCHP ( from 400kw upto 3770KW).
MWW Sewage Biogas Engines made in Germany (50Hz) |
|||||||||||||
|
Model
|
COP
(KW)
|
Engine
Model |
Bore*Stroke
(mm) |
Displace
ment (L) |
Ratation
Speed (rpm) |
Elec.
Eff. (%) |
Therm.
Eff. (%) |
Total
Eff. (%) |
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
EMW-400B5
|
400 | TCG2016V08C / CG132-8 |
132*160 |
17.5
|
1500 | 42.8 |
42.1
|
84.9 |
3090*1490*2190
|
5340
|
|
||
| EMW-600B5 | 600 | TCG2016V12C / CG132-12 |
132*160 |
26.3
|
1500 | 42.7 | 42.3 | 85.0 |
3690*1490*2190
|
7000
|
|
||
| EMW-800B5 | 800 | TCG2016V16C / CG132-16 |
132*160 |
35
|
1500 | 42.8 | 42.3 | 85.1 |
4090*1590*2190
|
8450
|
|
||
| EMW-1200B5 | 1200 | TCG2020V12 / CG170-12 |
170*195 | 53.1 | 1500 | 42.0 | 43.8 | 85.8 | 4790*1810*2210 | 11700 | |
||
| EMW-1560B5 | 1560 | TCG2020V16 / CG170-16 |
170*195 | 70.8 | 1500 | 41.7 | 44.0 | 85.7 | 5430*1810*2210 | 13320 | |
||
| EMW-2000B5 | 2000 | TCG2020V20 / CG170-20 |
170*195 | 88.5 | 1500 | 42.9 | 43.3 | 86.2 | 6200*1710*2190 | 17900 | |
||
| EMW-3770B5 | 3770 | TCG2032V16 / CG260-16 |
260*320 | 271.8 | 1000 | 43.0 | 39.9 | 82.9 | 9200*2690*3390 | 51200 | |
||
MWM Sewage Biogas Engines made in Germany (60Hz) |
|||||||||||||
|
Model
|
COP
(KW)
|
Engine
Model |
Bore*Stroke
(mm) |
Displace
ment (L) |
Ratation
Speed (rpm) |
Elec.
Eff. (%) |
Therm. E
ff. (%) |
Total
Eff. (%) |
Overall
dimension (L*W*H)(mm) |
Weight
(kg) |
Click for
Detail Data |
||
|
EMW-400B6
|
400 | TCG2016V08C / CG132-8 |
132*160 |
17.5
|
1800 | 41.6 |
43.2
|
84.8 |
3170*1490*2190
|
5120
|
|
||
| EMW-600B6 | 600 | TCG2016V12C / CG132-12 |
132*160 |
26.3
|
1800 | 41.4 | 43.7 | 85.1 |
3770*1490*2190
|
6260
|
|
||
| EMW-800B6 | 800 | TCG2016V16C / CG132-16 |
132*160 |
35
|
1800 | 41.7 | 43.3 | 85.0 |
4130*1490*2190
|
6780
|
|
||
| EMW-1200B6 | 1200 | TCG2020V12 / CG170-12 |
170*195 | 53.1 | 1500 | 41.8 | 43.8 | 85.6 | 5970*1790*2210 | 12850 | |
||
| EMW-1560B6 | 1560 | TCG2020V16 / CG170-16 |
170*195 | 70.8 | 1500 | 41.4 | 43.9 | 85.3 | 6640*1790*2210 | 14850 | |
||
| EMW-2000B6 | 2000 | TCG2020V20 / CG170-20 |
170*195 | 88.5 | 1500 | 42.6 | 43.3 | 85.9 | 7470*1710*2190 | 19400 | |
||
| EMW-3510B6 | 3510 | TCG2032V16 / CG260-16 |
260*320 | 271.8 | 900 | 43.3 | 38.5 | 81.8 | 9420*2690*3390 | 53300 | |
||
• Transport dimensions for gensets; components set up separately must be taken into consideration.
• According to ISO 3046/1 at U=0.4 kV,cos=1.0 for 50 Hz and methane number of MN-70 (MN-80 for some engine models) for natural gas.
• Exhaust gas cooled to 120°C for natural gas and 150°C (TCG2032 180°C) for biogas.
• NO ≤ 500 mg/Nm³; exhaust gas dry at 5 % O2.
• Data for special gas and dual gas operation on request.
.jpg)
.jpg)
.JPG)
.JPG)
.JPG)
.JPG)
.jpg)
.JPG)
.jpg)
.jpg)
